Prox 300 - DMLS
DMLS is direct metal printing, the parts are built layer by layer. using a method by wich the most complex parts can be manufactured.
Metal powder particles are melted together using a high-precision laser. The laser is aimed at the powder particles in order to selectively build thin horizontal layers. Connecting each new layer to the previous layer, brings a quality alternative to the traditional production processes. The parts are not built by removing material in different stages, but by adding material. One of the advantages derived from this method: fast construction times and the ability to produce very complex assemblies as a single part.
Prox 300 printer
- Optimize features and extremely thin wall thickness.
- Surface finish quality up to 200-5 Ra μ M requiring less Post processing.
- Very dense and non-porous parts.
- accuracy of +/- 50 µm (+/- 0.002 inch) in small parts,
+/- 0.2% on large parts. - Repeatability of about 20 μm
- Creating 20 degree angles without supports.
- Less support and improved quality of space means less Post processing and less use of materials – hence, time and cost savings.
Specifications
Maximum tray size:
Maximum size of structure: 250X250X330mm.
Minimum production time:
5
2
DAYS
Layer thickness:
Minimum 5 microns
Accuracy:
±0.002MM
Laser power
50W
X-Y resolution
±20μm
Optional materials:
Stainless Steel 17-4 PH, AlSi12 Aluminum Alloy, CoCr Chrome Cobalt
How to apply Direct Metal Laser Sintering - DMLS
Ready to begin?
Why wait? Submit your parts for production now and let’s start printing!
